Upcycled Drawer Shadowbox

MATERIALS & TOOLS NEEDED:
Old Drawer - Again we scored at the Re-Store
220 Grit Sandpaper
Summer Squash Spray Paint
White Spray Paint
Mod Podge - Satin Furniture
Painter's Tape
A piece of your favorite paper (big enough to cover the drawer bottom)
Mod Podge Decoupage Tools
Foam Brush

CLEAN AND PREP - Lightly sand the entire drawer and then clean off all of the dust.  Use a lintless rag and a cleaner, like denatured alcohol, to wipe down the entire drawer and make sure there is no dust left behind.

PAINT - Spray the inside and outside sides of the drawer with the Summer Squash paint.  Once it's dry, mask off the yellow areas with paper and tape and spray the drawer face (what becomes the top) with the white paint.  When the paint is dry, mask off the interior areas with tape to prevent getting glue on your fresh coat of paint.

Drawer with sides masked to protect the paint while we spray the white paint. (To borrow from the Wizard of Oz: Pay no attention to the mess behind the drawer!)

Drawer with sides masked to protect the paint while we spray the white paint. (To borrow from the Wizard of Oz: Pay no attention to the mess behind the drawer!)

PAPER - Measure the area of the drawer you want to cover with the paper, transfer and then cut those dimensions from your favorite paper.  Just like wallpapering, you Spread Mod Podge on the back of the paper, lay the paper in the drawer and use the tools to ensure it is smooth and no bubbles are underneath.  Let the paper dry for an hour and then paint over the paper with Mod Podge. We used 2 top coats allowing for an hour of drying time in between coats.  

HANG - Once it is all dry it is ready to use.  Hang your new Shadow Box and enjoy.